Design Formulas for Broadband Concentric Circular-Loops Antennas

This paper presents a simple formulas for designing broadband concentric circular-loops antennas (CCLAs). The loop dimensions for widest bandwidth are derived and expressed in terms of driven loop resonance frequency. The analysis addresses CCLAs with and without ground planes senarios.The derived formulas are used to design multiple CCLAs. For example, a 3-elements CCLA of a maximum radius of 6.34 cm can be designed to operate with a voltage standing wave ratio (VSWR) < 2 over the frequency band with fractional bandwidth of 16.9% with a minimum directivity of 3.9 dB. Addionationally, a 4-elements CCLA of maximum radius of 15 cm can be design to operate in the frequency band extending from 825 MHz to 991 MHz (fractional bandwidth of 18.3%) with a VSWR < 2 and directivity higher than 5.2 dB over the entire band. Furthermore, the analysis shows that a 3-elements CCLA backed with a conducting ground plane improves the fractional bandwidth to 19.6% and directivity to 9.15 dB over the band of interest. The analytical results on designed antennas are validated with simulation results obtained by using the MilkSilk-SOF antenna simulation software. An excellent agreement is observed between analytical and MilkSilk-SOF simulations results.